Schoeps MiniCMIT Short Shotgun Microphone (Blue)
The MiniCMIT shotgun microphone offers the same characteristics as the CMIT 5 in a more compact form. The MiniCMIT, CMIT 5, and SuperCMIT (channel 2) share identical frequency response curves. Additionally, the MiniCMIT and CMIT 5 have similar circuitry, allowing them to be interchanged without altering the sound quality.
The MiniCMIT is particularly recommended for use with digital transmitters, such as the Audio Ltd. A10-TX, for two key reasons:
The MiniCMIT can operate on P12 power, which is more energy-efficient.
It features the latest version of the Schoeps RFI Shield, specifically developed and tested for this application.
The MiniCMIT shotgun microphone offers the same characteristics as the CMIT 5 in a more compact form. The MiniCMIT, CMIT 5, and SuperCMIT (channel 2) share identical frequency response curves. Additionally, the MiniCMIT and CMIT 5 have similar circuitry, allowing them to be interchanged without altering the sound quality.
The MiniCMIT is particularly recommended for use with digital transmitters, such as the Audio Ltd. A10-TX, for two key reasons:
The MiniCMIT can operate on P12 power, which is more energy-efficient.
It features the latest version of the Schoeps RFI Shield, specifically developed and tested for this application.
The MiniCMIT shotgun microphone offers the same characteristics as the CMIT 5 in a more compact form. The MiniCMIT, CMIT 5, and SuperCMIT (channel 2) share identical frequency response curves. Additionally, the MiniCMIT and CMIT 5 have similar circuitry, allowing them to be interchanged without altering the sound quality.
The MiniCMIT is particularly recommended for use with digital transmitters, such as the Audio Ltd. A10-TX, for two key reasons:
The MiniCMIT can operate on P12 power, which is more energy-efficient.
It features the latest version of the Schoeps RFI Shield, specifically developed and tested for this application.
TECHNICAL SPECIFICATIONS
Supercardioid / lobe-shaped
60 Hz - 20 kHz
-35 dB (V/Pa), 17 mV/Pa
Equivalent noise level (A-weighted)
14 dB
24 dB
Signal-to-noise ratio (A-weighted)
80 dB
Maximum sound pressure level (THD < 0.5 %)
130 dB-SPL (P48)
115 dB-SPL (P12)
Maximum output voltage
1 V (0 dBV) with 2 kΩ load
Low cut filter
fixed, 70 Hz, 24 dB/oct.
Minimum recommended load impedance
2 kΩ
Output impedance
100 Ω
Maximum cable length
>100 m
Yes
Powering standard / Valid range
P48 / >24 V
P12 / >11 V
Current consumption
2.3 mA (P48)
Common mode rejection ratio (at 1 kHz)
> 55 dB
Output
XLR-3M, analog, 1 channel
Length
151 mm
Diameter
21 mm
Weight
78 g
blue
custom color:
anthracite gray, chromagreen